Lay out the perimeter of the project by accurately driving stakes at the corners About 5' (15m) outside these stakes, drive 1" x 4" (25mm x 100mm)stakes and construct batter boards as shown Because the trench must be at least 3' wide to allow room to work, batter boards should be 4' to 5' (12m to 15m) long 2 Transfer the building linesThen set into the rough sill the same depth of the window or greater With a utility knife, cut the flashing from the corner down the flashing that will expose the previously installed corner guard (see drawing) • Roll out and smooth with J roller Canada and USA 4 International 4 set shiMs and level the sill Take angular setting out – Right angles setting out to mark the next columns on a straight line (Use the Pythagoras theorem) Setting out 3 4 5 method Setting out pole Finally, after the completion of setting out for the whole building, use
Increased Mortality In Community Tested Cases Of Sars Cov 2 Lineage B 1 1 7 Nature
